Science First Pest Control · Serving 12 cities

PESTGOGOPESTGOGO

Food & beverage

Food and beverage pest control and audit support

For food plants, bakeries, dairies, breweries and food warehouses. A documented risk assessment, closed entry routes and the records your QA team needs for audits.

Fruit moving along a stainless-steel sorting line in a food processing plant, with workers in hairnets behind it

Risk

What can go wrong

  • Audit findings

    Live activity, droppings or a missing record found during an FSSAI, customer or certification audit becomes a finding against the site.
  • Product contamination

    Pests, or the products used to control them, reaching food, packaging or food-contact surfaces.
  • Activity that keeps returning

    Treating the same area every month while the drain, door gap or waste point that brings pests back stays open.
  • Stored-product losses

    Beetles and moths in flour, grain, spice and dry stores, often noticed only after they have spread.
  • Flies from hidden sources

    Drain biofilm, waste and wet areas breeding flies faster than spraying can remove them.
  • Customer complaints

    A foreign-body complaint traced back to a pest damages trust with buyers and retailers.

Method

How we work

  1. Risk assessment

    Pests, zones, product exposure, entry routes and seasons are assessed before device numbers and visit frequency are decided.

  2. Gap assessment

    Structural gaps, drains, doors and utility penetrations are photographed and listed with an owner and a target closure date.

  3. Risk-based monitoring

    Rodent stations, glue boards, fly catchers and pheromone traps are placed by risk, not by fixed spacing, on a numbered device map.

  4. Controlled treatment

    Only site-approved products, applied away from open product and food-contact surfaces, with every use logged.

  5. Trends and CAPA

    Activity is trended by zone, device, pest and month. Repeated activity triggers a root-cause check and a corrective action with an owner.

  6. Review

    A monthly report and a quarterly trend review with your QA team, so decisions are made on the same numbers.

Food & beverage

Frequently Asked Questions

Audits and documentation

Will your pest-control file stand up to an FSSAI, ISO 22000, BRCGS, customer or internal audit?

We build the file around what auditors ask to see: risk assessment, device map, service and inspection records, pesticide log, trends, corrective actions and training records, each with its frequency and sign-off.

MoreLess

No contractor can promise an audit result. The file is designed to support audit readiness; final compliance depends on the FBO's complete system and auditor/regulator assessment.

Do you carry out a documented risk assessment before deciding device numbers and visit frequency?

Yes. Device numbers and visit frequency come out of a documented risk assessment, not a fixed spacing rule.

MoreLess

It looks at pest pressure, product exposure, entry routes, neighbouring land and seasonal change, and it is reviewed when the site or the process changes.

Will you find structural gaps and hygiene issues, not only treat pests?

Yes. Gaps in doors, walls, drains and utility penetrations are recorded with a photo, an owner and a target date, and tracked until they are closed.

Can you show pest trends by zone, device, pest and month?

Yes. Trends are reported in that breakdown, with thresholds that flag a rising zone before it turns into a finding.

How do you investigate repeated catches or sightings?

Through root-cause analysis and corrective action: each case gets an owner, a target date, a verification step and a later check that the fix worked.

Can I see your report formats before appointing you?

Yes. Ask during the survey and we’ll walk you through the service report, device map, pesticide log, trend report and monthly review format.

MoreLess

Redacted samples will also be published in our document library. They are marked “coming soon” until real, redacted documents are ready; we don’t publish made-up samples.

Monitoring and control

How do you decide where rodent stations, glue boards, fly catchers and pheromone traps go?

From the risk assessment: devices go where pests enter, travel and find food, at a density that matches the risk of each zone.

Where should fly catchers be placed in a food plant?

Away from open product, and away from doors and windows where their light would draw insects in from outside.

MoreLess

Height and line of sight matter too. Glue-board units hold insects on the board instead of dropping fragments.

Can rodents be controlled without bait contamination risk in high-care areas?

Yes, with layers: bait stations outside, traps and monitoring without toxic bait inside sensitive areas, and proofing to stop entry.

How do you find beetles and moths in flour, grain or spice stores before they spread?

Pheromone traps in dry stores, checks on incoming material, stock rotation and cleaning, with treatment targeted at the affected lot or area.

Why do flies keep coming back after spraying?

Because the breeding source is still there. We trace flies to drains, waste and wet areas, and use catcher counts to check the source correction worked.

How do you handle drain flies and cockroaches breeding in drains?

They breed in the biofilm lining the drain. Pesticides don’t remove it; mechanical cleaning and sanitation do, so that is where we start.

How do you stop birds getting into the plant?

Exclusion first: proofing, netting and dock-door discipline, with humane removal of nests, planned so birds aren’t trapped inside.

Products, people and incidents

How do you prevent pesticide contamination of food, packaging and food-contact surfaces?

With a chemical approval matrix: which product may be used where, how it is applied, and where it is never used. Every use is logged with date, product, batch, area and quantity.

Are your technicians trained for food plants?

Our technicians go through classroom and on-the-job training, with periodic tests and re-training. For your plant we add your induction, hygiene and PPE rules.

What happens if a live rodent is seen during production or just before an audit?

The site escalation plan starts: the area is contained, trapping is stepped up, the cause is investigated and the closure is documented.

Can your reports compare several of our plants?

Yes, when every plant uses the same zone and pest names and the same measures. We set reports up that way so plants can be compared side by side.

For purchase teams

Questions procurement asks before appointing a vendor

Commercial comparability, service evidence and contract terms, answered before the RFQ.

Procurement

Can the scope be made comparable across vendors, so the lowest rate isn’t misleading?

Yes. Our proposal sets out the scope line by line: pests covered, areas, visit frequency, manpower, devices, consumables and exclusions.

MoreLess

Ask every vendor to quote against the same lines. Once the scope is the same, the rates become comparable, and gaps such as missing devices or fewer visits are easy to spot.

What is included in the monthly rate, and what is charged separately?

The proposal lists both before you sign: what the monthly rate covers, and any one-time charges for devices, equipment or replacement consumables.

What is the response time for an emergency sighting?

Response times are agreed by severity in your contract, with named escalation contacts.

MoreLess

We don’t quote one number for every site, because distance, access rules and shift timings differ. We agree realistic times for your site during the survey and write them into the contract.

Can one vendor manage several sites, in different cities?

Where we serve each location, yes: one central contract, a schedule for each site and reports in one format.

MoreLess

Share your site list and we’ll confirm which locations we can cover before you decide. We won’t accept a site we can’t service properly.

Which statutory and vendor documents will you submit before work starts?

Send us your vendor-registration checklist and we’ll provide each document with its validity date before mobilisation.

MoreLess

Keeping expiry dates visible lets your team track renewals instead of finding a lapsed document during an audit.

How do I know a scheduled service was actually done?

Every visit ends with a service report: date, time, areas covered, products used and findings, signed off by your site contact.

MoreLess

Ask to see the report format before you appoint us, and check that each report matches the agreed schedule.

How do you control chemical use around employees, food and sensitive areas?

Products and methods are agreed area by area before work starts, and restricted zones are written into the site plan.

MoreLess

Product labels and safety data sheets are available to your team for every product used on site.

Which measures can procurement use to judge vendor performance?

Response against the agreed times, repeat activity in the same zone, open corrective actions, complaint closure time and audit findings.

MoreLess

We agree which measures apply to your site at the start, so the review discusses the same numbers every time.

How will you take over from our current vendor without losing device history?

We start with a baseline survey and keep the existing device numbering and records where your current vendor hands them over, so trends continue instead of restarting.

Documents

Related documents

See what each document covers before you ask for it.

All documents

Next step

Talk to us about your site

Request a site survey or quotation

Pests or problems (optional)

Site type, area, what you are seeing, any audit or deadline.

How should we contact you?